SDB-1: Benchtop Solids & Powder Dispenser
Benchtop Powder Dispenser
The bench-top automatic Solids Dispenser SDB-1 can dispense calibrated volumetric doses (and multiples) of powders in a highly precise and repeatable fashion.
The laboratory dosing solution increases lab productivity and at the same time ensures process accuracy. Compared to other techniques the volumetric solids dispensing is particularly fast (2.5-3.5sec. per dose). Due to its compact benchtop configuration the SDB-1 is easy to integrate in the workflow and alleviates tedious repetitive tasks .
The dispensing heads are interchangeable to enable quick processing of several materials with different dose size and no cross-contamination without cleaning steps. A small dispensing head is capable of dispensing doses from 5 mg up to 250 mg in a single shot, or higher for incremental dispensing. A large dispensing head can dispense from 5 mg up to 5 grams and multiples.
An LED display provides feedback on the amount of powder being dispensed. The SDB-1 is powered from the AC socket, user selectable 115V/230V.
We also offer customised solutions, e.g. for automation.
|Features||• Exchangeable dispensing heads.|
|Performance||• Solid Dispenser accuracy will remain over time, wear of motor and mechanism is compensated.
• One-time calibration for each powder type.
• Powered by AC power socket.
|Dispensing advantages:||• Usable with different solids/powders.
• Typical dispensing range from 5 to 250 mg (small dispensing head) or 5 mg up to 20 g (large dispensing head).
• Easily interchangeable dispensing heads.
• Standard glass vials or customized container to contain powder sample.
• Separation between dispensing unit and dispensing head.
• LED display provides information on amount being dispensed.
• High repeatability
• High accuracy
• Smallest volumes accessible
• Easy to use and maintain
• Low voltage
|Typical Dispensed Powders:||• Sodium Carbonate
• Sodium Ascorbate (Ascorbic Acid)
• Sodium Bicarbonate
• Sodium Chloride
• Sodium Dithionite
• Sodium Molybdate
• Sodium Sulphite
• Bacto Agar
• Agar Noble
• T.C. Grade Agar
• Magnesium Sulfate
• Glass beads (Density= 1.7 – 2.5 g/ml)
• Silica Gel (SiliaFlash® F60) 40-63µm (0.040-0.063 mm)
• Siliasphere Phenyl, 70A (Microbeads)
• Methacrylic Polymer Resin
• Dental Amalgam powder
• Somatropin (human growth hormone)
• Lidocaine Hydrochloride
• Proteinase K
• Carbon Black
• Ammonium Chloride
• Granular fish feed
• Coal powder
|Specifications||• Size: 120 (L) x 200 (W) x 450 mm (H)
• Power supply: User selectable 115V or 230V
• Power rating: 3W max
• Weight: 3 kgs
Increased lab productivity and ease of use.
The SDB-1 Solids Dispenser increases the speed of dispensing solid/powder samples while retaining the flexibility of freehand processing.
Occupational health of operators.
Work monotony and operator fatigue in repetitive processing of samples is relieved by automatic portioning and dispensing with the SDB-1.
Solid/powder sample portions are dispensed accurately with the SDB-1 with each volume consistently within a tight tolerance eliminating errors of manual processing.
X-Y table for 96-well plates maneuver
Operator may operate the X-Y table by means of sliding (in, out & left, right) to direct each dispense into well plate. A motorised version is available upon request.
The X-Y table is a removable attachment, so SDB-1 can be used for normal dispensing into other mediums such as vials or tubes.
Request Prices or more Information.
Simply fill up the form below and we’ll get back to you within 48 hours concerning our semi automatic capping machines.